How to Use a Remote Probe Thermometer for Traeger Grill

How to Use a Remote Probe Thermometer for Traeger Grill

Using an exterior remote probe thermometer, you can quickly figure out what’s wrong with your Traeger grill’s performance.

In certain conditions, it may be necessary for us to first perform some troubleshooting. So, how do you use a remote probe thermometer for a Traeger grill?

The remote probe thermometer allows you to monitor your Traeger grill remotely so you do not have to raise the lid every time you want to check the temp.

This device plugs into your traeger and displays the current temperature either on the LCD screen or on a small remote display.

Some remote probe thermometers show the temperature of the grill, while others show the temperature of an oven or smoker. They also allow you to set a temperature alarm to sound when the temperature goes above or below a certain point.


What is a Remote Probe Thermometer?

Only when you cook with pleasure can you truly enjoy good barbecue food. You need to have precise control of the temperature of the cooking area if you want to enjoy delicious foods.

To get this level of accuracy, probes are often put into different parts of the grill, like the outdoor unit and the smoker.

These probes can tell you whether the temperature of the cooking compartments is at the ideal level or not.

Then, you can decide if your food is ready or not.

A remote probe thermometer gives you a monitor that shows you the temperature in different parts of the smoking machine. This lets you control the temperature.

Cooking should always be a fun activity, especially when there are tools available to help increase the pleasure of the experience.

A remote probe thermometer, on the other hand, is a device that allows you to measure the temperature inside the smoking machine without opening the cover.

A remote probe thermometer is a gadget that allows you to view the temperature inside the cooker without having to open the cover and see what is happening inside.

Even if you’re a bit distant from the cooker, you can see if everything is at the desired temperature to cook your food to perfection.

You’ll be able to see on the display whether the temperature is higher or lower than it should be to cook your food correctly.

The Advantages of Using a Remote Probe Thermometer

Remote Control

It remotely informs you of the temperature inside the smoker or oven by opening the lid. You do not even need to enter your cooking area.

You can simply monitor the temperature without having to raise the lid or open the cooking area.

Utilization Ease

Another significant advantage of utilizing a Traeger remote probe thermometer is its ease of use. It can be used with ease by newcomers and hunters without any special training.

You only need to insert the probes into the cooking device and connect the transmitter to the device. After that, turn the smoker on and let the Traeger do its job.

Cooking Time Reduction

An excellent remote probe thermometer may allow you to reduce your cooking time when it notifies you when the target temperature is reached.

Some product models are capable of notifying you within a short period of time via sound and/or beeper. This means you can cook whenever it is convenient for you.

How to Use a Remote Probe Thermometer for Traeger Grill

First, you must correctly install the probe within the smoking machine’s chamber to ensure that the reading is accurate and that it can be used for a long period of time.

Prepare your meat for the grill by removing the skin and then seasoning it with a little salt.

After that, just take the meat probe and insert it into the meat. Then insert the electronic receiver into your pocket so that you can read the measurement clearly on your cellphone or on a digital screen that comes with the product model of your choice.

Clip the second probe onto the lid of the smoker and leave it there while you prepare your food for cooking.

Remove the other ends of both probes once the food is cooked to the desired level and then store them until the next time you need to use them.

Now connect them to the receiver, turn on the Traeger and wait for the temperature to reach 225 degrees.

Simply turn on the wireless receiver to keep track of the temperature in the chamber while you’re out of the house or doing something else.

How to Calibrate Traeger Meat Probe Thermometer?

To begin, fill a glass with water and place it in a freezer for about an hour until it is completely frozen.

Start by putting a thermometer in the water until it reaches the freezing point. Then, take it out right away and don’t let it touch the ice.

Put the probe back into the water and do it again two more times to make sure it is accurate before you use it to cook.

When the meat thermometer in the ice bath is ready for use, take it out and submerge it in water until it registers the correct temperature, then dry it with a cloth and store it in a safe place for future use.

If it does not, you may repeat the calibration process once again until the reading is correct, but make sure that you do not exceed three attempts per each temperature gauge to ensure accuracy when using it.

Also Read: How to Clean Traeger RTD Temperature Probe

Final Words

If you like to cook and have a good Traeger smoker, you should get a remote wireless thermometer to make sure your meat is always cooked to perfection.

With our help, you now know the best model available on the market as well as how to calibrate it using the ice bath method to make it even more reliable for your cooking needs.

We believe that with this instrument by your side, you will no longer need to worry about undercooked meats and other complications that normally come with grilling with a smoker at home.

A remote probe thermometer is a quick, useful, and easy-to-use tool you can add to your collection to help you smoke and grill food well.

Even if you are new to the world of outdoor cooking, you will be able to use this instrument with ease thanks to the fact that it comes with a simple and straightforward interface that requires no technical knowledge at all.

There will always be some flaws that you can expect from a product like this since it is not perfect, but it makes up for it with its reliability in helping you cook your food to perfection each and every time.

If you’re having trouble with the meat probe thermometer, we suggest cleaning it with a damp cloth after each use to make it last longer and work better.

Scroll to Top