Your Auger is charged when you use it on your Traeger grill.
The harder your grill fires and the more time it spends firing, the more juice your Auger will consume. Charging your Auger prior to firing your next set of burgers or steaks will save you from the inconvenience of having to refill it.
So, how to charge the auger on a traeger grill? Some traeger owners ask how to charge the auger on a traeger grill.
Traegers are wood pellet grills that cook food using wood pellets. These wood pellets burn slowly, requiring the auger to constantly rotate them.
When the auger stops rotating, the pellets will burn out and the traeger won’t cook food. For this reason, it’s important to know how to charge the auger on a traeger grill.
To charge the auger on a traeger grill, first unplug it and unplug the power cord from the wall. If the auger stops rotating when you unplug it, then it’s fully charged.
Traegers may sometimes stop rotating when they’re plugged in, because the auger or the motor may be clogged with food particles that require cleaning.
To clean the auger or the motor, disconnect the power cord from the back of the traeger and use a vacuum cleaner to remove any food particles.
Then plug the power cord back into the traeger and plug it back into the wall. Finally, plug in the auger and turn it on.
If the auger rotates after you clean it, then it’s fully charged. To charge the traeger grill ‘s motor, simply fill the hopper with pellet fuel and place it back on the cooking grate.
- 1 How to Charge the Auger on a Traeger Grill
- 2 How Do You Prime a Traeger Auger?
- 3 Do You Have to Prime the Auger on a Traeger Every Time?
- 4 What is the Exact Process to Charge the Traeger Auger?
- 5 What Are Traeger Initial Firing Instructions?
- 6 What Should You Do If Your Traeger Auger Isn’t Turning?
- 7 Final Words
How to Charge the Auger on a Traeger Grill
Traeger Grills are known for their large grilling surface, flavorful food, and easy cleanup process.
However, cleaning an auger on a Traeger Grill can be tricky. Don’t worry. Here is a step-by-step guide on how to clean your auger on a Traeger Grill.
Remove the Grill Grates
Remove the grill grates from the grill. To do this, simply twist the coat hanger bars on either side of the grates to remove them.
Remove the Auger
The auger is located at the bottom of the grill, and can be removed by loosening the bolts that connect the auger to the motor. Next, remove the auger from the grill by pulling it backward out through the exhaust hole.
Remove the Grease Tray
The grease tray sits at the bottom of the grill and collects grease from the drippings that is poured into it when you cook food on the grill. Remove the grease tray by loosening the screws that hold it in place.
Remove the Grease Cup
The grease cup sits on top of the grease tray and catches the grease drippings as it drains from the auger. Remove the grease cup by loosening the screws that hold it in place.
Remove the Grease Trap
The grease trap sits underneath the grill and collects grease that is poured from the auger into the grease tray. Remove the grease trap by loosening the screws that hold it in place.
Clean the Auger and Grease Tray
To clean the auger and grease tray, use a brush to get any debris out. Then, wash the auger and grease tray in warm soapy water and then rinse with clean water. Dry thoroughly with a cloth or paper towel.
Clean the Grease Cup and Grease Trap
To clean the grease cup and grease trap, use warm soapy water and a brush to get any debris out. To clean the remaining grease in the grease cup, pour hot water into it and pour it out again. Then, wash the grease cup and grease trap in warm soapy water and then rinse with clean water.
Reassemble the Grease Trap
Install the grease trap into the grill by placing the two screws that hold it in place. Then, reinstall the grease cup by tightening the screws that hold it
How Do You Prime a Traeger Auger?
A Traeger auger is a machine used for mulching, shredding and shredding large logs and branches into smaller pieces.
The auger uses two cutting blades that rotate in opposite directions, forcing the cut material into a chamber where it is shredded further.
For proper operation, it is important that you prime the auger before using it.
Priming is the process where the auger teeth or blades are sharpened, lubricated and cleaned before use. This is done to ensure that the auger runs smoothly without any hitches.
To prime a Traeger auger, follow these steps:
- Remove the hopper cover – Remove the hopper cover to expose the blade assembly.
- Check the blade assembly for wear – The blades should be sharp and free of nicks. They should also be free of big dents or gouges. Clean the blades with soapy water and rinse thoroughly.
- Clean and lubricate the blade assembly – Use a degreaser to clean off any grease on the blades. Afterwards, apply a small amount of grease on the blades and on the bearing assembly.
- Replace the hopper cover – Replace the hopper cover and connect the auger cord to an outlet.
- Test the auger – Put the hopper cover back in place and replace the plug. Turn the auger on and let the motor run for 30 seconds. Check the blades for wear, and if the blades are sharp, continue using the auger. If the blades are dull, then replace the blade assembly.
Do You Have to Prime the Auger on a Traeger Every Time?
Traeger is a great brand of home smokehouse grills that people use to grill meat outdoors.
However, many people wonder: Do I have to prime the auger every time I fire up my Traeger? Auger priming isn’t necessary, but it’s recommended.
All Traeger grills are factory-primed with cooking grease. However, this grease isn’t completely burned away.
If you grill meat without first priming the auger, the grease will burn instead of smoke. This will result in a taste that’s not as good as it could be.
Furthermore, the grease can become a fire hazard or lead to clogging. Thus, it’s crucial that you prime your auger before grilling.
What is the Exact Process to Charge the Traeger Auger?
The auger is very important to a pellet grill because it provides the contact with the pellets and distributes them evenly across the grill grates. But how can you charge the auger?
A traeger auger doesn’t use electricity to charge but gravity, as in it’s weight, that charges it, not any kind of electricity.
First, the auger must be removed from the grill. Then, you can lay it flat on a work bench or table.
Next, you must remove the auger hopper cover. After that, you must remove the auger screen from the auger.
After that, you must remove the auger screen from the auger. After that, you must remove the auger screen from the auger.
What Are Traeger Initial Firing Instructions?
Traeger grills have revolutionized the BBQ industry by offering a no-fuss way to cook delicious, flavorful food with perfect precision.
Traeger grills maintain a consistent temperature, so you can cook your food to perfection every time.
Traeger grills also have amazing accessories like a rotisserie grill and a pellet hopper, which makes cooking more convenient and enjoyable.
Step 1: Remove the grill from the box.
Step 2: Remove the grill grates from the grill box.
Step 3: Remove the grill grates from the grill box and place on the grill.
Step 4: Start the grill and get it to your desired temperature. Once it’s ready, place your meat on the grill and close the lid.
Step 5: After cooking, transfer the meat to the cutting board.
Step 6: Clean and wipe the drip pan and grill grates with a damp paper towel and that’s it!
What Should You Do If Your Traeger Auger Isn’t Turning?
Most of the time, the Traeger grill is working properly without any issues.
Check that it is plugged into a grounded outlet and that the circuit breaker is not tripped.
If power isn’t a problem, make a simple check of your system.
To test this, gently shake the grill while monitoring the temperature gauge on your control panel to ensure that the temperature is steady.
If the pin is missing, look around the grill to see if you can find the pin hole plug by looking carefully for it on the hinges or underside of the housing assembly.
Then, place it in the hole and secure it there with the included pin.
Replace the pin with a screw and turn in the screw until the pin seats properly against the gasket on the housing assembly.
The Traeger Auger does need a bit of maintenance in order to keep it working properly for years to come.
To investigate, remove the Traeger grates, drip pan, and the housing assembly and set aside.
Also Read: Why is My Traeger Grill Losing Heat?
If your traeger grill’s auger isn’t charging, try cleaning it.
Carefully remove the grill’s auger from the grill’s tube using a pair of pliers. Then, clean the auger with soapy water and a paper towel or pipe cleaner.
Finally, reassemble the auger and reattach it to the tube.