You can extend the lifespan of your grill grates if you have them cleaned regularly.
Since they’re pretty delicate, you need to care for them up front. Here are some tips on how to clean Traeger grill grates and make them look fantastic again.
So, how do you clean Traeger grill grates? Cleaning your Traeger grill grates can be easy or hard, depending on what kind of grates you have and whether you have a pellet grill or a traditional Traeger grill.
If you have a pellet grill, the cleaning will be easy because the pellets are directly burned onto the grates. All you have to do is scrape the burnt pellets off using a scraper tool like a spatula or a wire brush.
If you have a Traeger grill, the cleaning will be hard because the grates are not covered by pellets and will require a little extra work to clean. Follow the steps below to clean your Traeger grill grates.
First, remove the grates from the grill and place them on a flat surface. Second, heat the grill to 450 degrees Fahrenheit.
Third, soak the grates in water for 30 minutes. Fourth, scrub the grates with a wire brush and soapy water on a flat surface.
Finally, rinse the grates well by hand and put them back into the grill.
- 1 Why Should You Clean Your Traeger Grill Grates?
- 2 Things to Remember Before Cleaning Traeger Grill Grates
- 3 How to Clean Traeger Grill Grates
- 4 How Do I Prevent The Grill Grates from Getting Dirty?
- 5 Conclusion
Why Should You Clean Your Traeger Grill Grates?
It becomes not simply a matter of appearance but also a matter of health for you and your family as well when your house smells like smoke all the time and your food tastes smoky as well.
If you do not properly clean your Traeger Grill Grates, you risk getting food contamination, which can make you sick or worse, cause serious health issues.
Cleaning your Traeger barbecue after use will help protect the unit from rust, which will eventually lead to costly repairs or even replacements over time.
It also ensures the BBQ will last longer without the need for frequent repairs and replacements, which can be costly in the long run.
Also, if you’re smoking brisket in your Traeger, having a dirty grate can affect the taste of the meat, making it bitter and not appetizing at all.
Things to Remember Before Cleaning Traeger Grill Grates
When cleaning the Traeger Grill Grates, there are several things to remember that will help you effectively do the job without any hassles.
You should use clothes that can absorb a lot of water when scrubbing, as this will help in getting rid of grease that has accumulated on the grate during the cooking process.
It is preferable to use a wire brush rather than an abrasive sponge to clean the grates. The former is more effective in getting rid of stubborn stains, while the latter can scratch the surface of the cast iron, making the cleaning process ineffective and time-consuming.
So far, it has been suggested that you clean the BBQ with hot water, but if you don’t want to damage the unit, especially the porcelain coating, you should use warm water instead.
There are different cleaning products you can use to clean, but soap and warm water are usually the best way to go.
Most of the products on the market contain chemicals that could harm the porcelain coating on the BBQ if not used.
If you choose, you may also decide to use some liquid dish soap or ammonia diluted with water for cleaning purposes.
Remember to test it before using it on your unit, as different brands have different chemical compositions which could cause damage to your unit.
Unless the RTD or thermocouple is damaged or broken, you should never attempt to replace it yourself. Because it is delicate and can be damaged easily by inexperienced hands.
For example, if there ‘s rust on the surface, you should use a wire brush to get rid of the rust before using any cleaner on it.
Metal scrapers may be used to remove the burned-on grease from the grill grates, and the scraping action helps to loosen it, making it easier to clean with a cloth soaked in soapy water.
To make the task easier and less time-consuming, it is preferable to begin cleaning with the parts that have accumulated the most grease and dirt.
Begin by spraying some soapy water onto the dirty parts of the grill grates and scrubbing them with a soft-bristled brush.
One may be found at the hardware store, and it’s relatively cheap.
How to Clean Traeger Grill Grates
Spray the grates with some soapy water using a spray bottle.
Apply some degreaser to the grates and allow them to soak for 10 minutes. Then, scrub with a wire brush and rinse off with warm water.
Remove the grill grates and soak them in a bowl of warm water mixed with mild detergent for about 15 to 20 minutes, then scrub with a stiff-bristled brush before rinsing off with clean water.
In the meantime, replace any parts that are rusty or damaged before reinstalling them on the grill.
Begin by vacuuming the inside of the grill using an appropriate attachment before replacing the lid, making sure it’s tight enough to prevent debris from falling into the grill.
Don’t drop any of the parts when putting the grill back together so you don’t scratch the surfaces.
How Do I Prevent The Grill Grates from Getting Dirty?
Make Use of High-Quality Hardwood Pellets
The pellets have a significant influence on the quality of the food that you cook on your Traeger grill; they determine the juiciness of the meat produced as well as the taste of the food cooked on the grill.
If the pellets are of poor quality, you are likely to get tough and dry meat with a burnt flavor.
Priming & Shut Down Cycle
The Traeger grill range’s priming and shut-down modes aid in the cleaning of the unit’s hot surfaces and help in the preservation and protection of the unit during the off-season.
However, during the off season, the shut-down mode should be turned on, which helps to preserve and protect the unit from rust and corrosion.
Consistency will help to prevent accumulation and make cleaning your Traeger Grill Grates much easier.
But if you want more accurate results, it’s best to clean the grill grates before cooking the food, so that the food doesn’t get contaminated by the grease that got into the grates.
How Often Should You Clean Grill Grates?
A tidy and well-kept barbecue The barbecue should never be used immediately after cooking a greasy meal, as it may lead to a messier cleanup process when cleaning the grill.
It is advisable to clean it thoroughly to remove any accumulated grease and debris from the grills or burners before firing it up again for your next grilling session.
However, it is mostly determined by the frequency of use as well as the types of foods you cook on the barbecue.
If they are excessively greasy, then you might need to clean them more often to ensure that the taste and quality of the grilled food is at its optimum.
Also, if you cook for more than six hours, you might want to clean the grates more often to get rid of the food that has soaked into the briquettes and kept the taste of the last meal you cooked on the barbecue.
This is especially applicable to charcoal barbecues that produce more smoke as a result of the burning process.
How to Clean Traeger Pellet Grills
Traeger pellet grills are those which are fueled with wood pellets which are fed into the firebox through an electronically controlled hopper system with an electronic auto ignition system.
When using a pellet grill, it is possible to adjust the temperature and smoke control levels to your preference, which makes it easy to cook different foods at different temperatures while still retaining the natural juices of the foods.
This will guarantee that your grilled food comes out juicy and tender regardless of the type of meat you prepare.
Similarly, if you have been cooking for an extended duration and you notice that your meal is not coming out as expected, you can adjust the temperature to your preferred setting and cook your meal a little longer until the juices start to come out and the flavors are enhanced.
To summarize, clean the Traeger grill gates on a regular basis to ensure that they are in their best working condition all the time.
Also Read: Can You Paint Grill Grates?
In conclusion, cleaning Traeger grill grates is easy. First, you need to remove the grates from the grill.
Then, use a wire brush to scrape off the ash and grease.
Finally, use warm water and a sponge to clean the grates and make sure they are dry before replacing them on the grill.