Why Is My Blackstone Griddle Igniter Not Sparking?

Having trouble with your Blackstone Griddle Igniter not sparking? You’re not alone! This is a common issue, but don’t worry—we’ve got you covered. In this blog post, we’ll show you why your igniter isn’t working and how to fix it.

We’ll discuss the most common causes and provide step-by-step instructions for troubleshooting.

Plus, you’ll learn about the different types of igniters used in Blackstone griddles, how to check for obstructions or damage, and how to replace the igniter if needed.

Get ready to get your griddle up and running again in no time.

Let’s dive in!


Why Won’t My Blackstone Griddle Igniter Spark?

If your Blackstone Griddle Igniter isn’t sparking, it’s likely due to a few potential causes. First, the igniter may be blocked or clogged with grease or other debris.

This can prevent the spark from igniting the gas. To fix this, simply clean out the igniter and make sure it is free of any blockages. Second, the battery in the igniter may be dead or low on power.

To test this, try replacing the battery with a new one and see if that solves the issue. Lastly, it could be an issue with the gas supply itself.

If you’ve checked all of the above and still can’t get your griddle to ignite, contact a professional to check your gas supply and ensure it is working properly.

With these simple tips, you should have no trouble getting your Blackstone Griddle Igniter sparking again.

Does A Blackstone Igniter Have a Battery?

You might be wondering if it has a battery. The answer is yes! The battery is usually near the igniter and is either a 9-volt or AA battery. This battery provides power to the igniter, so it can spark and ignite your griddle.

It’s important to check your battery regularly. Over time, it can become weak or corroded, making it unable to spark and ignite your griddle. But don’t worry—replacing the battery is easy and fast.

All you need are some basic tools and a few minutes of your time.

How Do You Fix an Igniter that Doesn’t Spark?

Are you a proud owner of a Blackstone griddle? If so, it’s important to keep it in top condition. One of the most important parts of your griddle is the igniter. To ensure your igniter works properly, here are some tips:

  • Check for any visible damage or corrosion on the igniter. Replace it if needed.
  • Make sure the igniter is connected to the spark module correctly.
  • Check the spark module for any visible damage or corrosion and replace it if necessary.
  • Connect the spark module to both the battery and power source properly.
  • Clean all electrical connections with a damp cloth and dry them thoroughly before reconnecting them.
  • Test the igniter by pressing down on it; if it sparks, you’re good to go!
  • If it doesn’t spark, try replacing the battery with a new one and see if that helps!

Regularly following these steps will help ensure your Blackstone griddle is always ready for delicious meals.

How Do I Know if my Igniter is Bad?

The igniter is responsible for sparking the flame, so it’s important to make sure it’s working properly.

Start by checking the battery in the igniter. If it’s dead or weak, it won’t spark correctly. Test the igniter by connecting it to a power source and seeing if it sparks. If not, replace it. Look for signs of corrosion or damage too – this could mean you need a new one.

If all else fails, take your Blackstone griddle to a professional technician who can diagnose the issue and replace any faulty parts. Don’t let your griddle keep you from cooking delicious meals.

How Do You Change the Igniter On A Blackstone Griddle?

The igniter may be the culprit. It’s located under the griddle top and connected to a spark generator.

To change it, you’ll need to remove the griddle top, disconnect the spark generator from the old igniter, and then install the new one by connecting it to the spark generator.

Once everything is secure, you can turn on your Blackstone Griddle. Before doing so, check for any other loose connections or damaged parts. With these easy steps, your Blackstone Griddle will be up and running in no time!

How To Replace the Battery on a Blackstone Griddle Igniter

Having trouble starting your Blackstone Griddle? Don’t worry, it’s an easy fix! You just need to replace the battery in your Blackstone Griddle Igniter.

To do this, first remove the igniter from its housing and unscrew the access panel. Then, remove the old battery and replace it with a new one. Make sure to use a compatible battery with your Blackstone Griddle Igniter, as using an incompatible one may cause damage or malfunction of the igniter system.

Once you’ve replaced the new battery, reassemble all parts and check for proper functioning before using your griddle again. It’s that simple! With just a few steps, you can get back to griddling in no time.

How to Replace An Igniter On A Blackstone Griddle

Replacing the igniter on your Blackstone griddle doesn’t have to be a hassle! All you need is a new igniter, a flat-head screwdriver, and a Phillips-head screwdriver. Here’s how to do it:

Start by removing the cover of the igniter with a flat-head screwdriver. Then, unscrew the old igniter and disconnect it from the wiring harness.

Now it’s time to get your new igniter ready. Connect it to the wiring harness and securely fasten it with screws. Put the cover back on, and you’re done!

To make sure everything is working properly, test your new igniter. Once you’ve done that, you can use your Blackstone griddle without any worries! Replacing an igniter is easy when you know how.

How Do I Manually Light A Blackstone Griddle?

Lighting your Blackstone Griddle is a breeze. With just a few simple steps, you can easily light it manually.

Start by turning off the gas valve and disconnecting the griddle from the gas source. Then remove all food items from the griddle surface and clean it thoroughly with a cloth or paper towel.

Turn on the gas valve and wait for 60 seconds for it to reach maximum pressure before attempting to light it manually. Place a long match or lighter close to the burner, open up the griddle lid, and ignite it while keeping your hand away from any potential flames.

Once you’ve successfully lit your Blackstone Griddle, adjust each knob until you reach your desired cooking temperature. Finally, close the lid of the griddle to ensure proper heat retention for optimal cooking results.

If you’re having trouble manually lighting your Blackstone Griddle, check for any blockages in its components, such as valves, regulators, or hoses, before attempting again, as this could be causing an issue with ignition.


Troubleshooting a Blackstone Griddle Igniter is simpler than you may think.

Check the battery, pilot tube, and thermocouple, or replace the igniter if necessary. You can also learn how to change the battery or replace it with basic tools and a few minutes of your time.

If all else fails, take your griddle to a professional technician for further diagnosis.

Scroll to Top