Why Does Your Blackstone Igniter Not Work?

Are you having trouble getting your Blackstone Griddle going? The igniter not working can be incredibly frustrating. Whether you’re a grilling enthusiast or a novice cook, don’t worry – we’ve got you covered.

In this blog post, we’ll discuss why your Blackstone Igniter isn’t working and provide straightforward-to-follow instructions for getting it up and running again. We’ll cover all of the common problems that could prevent your igniter from sparking up your griddle, from checking the battery connections to testing the spark module.

Plus, we’ll show you how to replace an igniter if necessary, as well as provide some tips on how to maintain your griddle so that it continues to work for years to come.

So if you’re having trouble getting your griddle started, keep reading.


What is a Blackstone Griddle?

The Blackstone Griddle is the perfect choice for outdoor cooking. This popular brand of outdoor cooking equipment is a flat-top griddle that can be used to cook everything from burgers to pancakes.

It has four adjustable burners beneath a flat surface, which are powered by propane gas for consistent and even heat. Plus, it features an integrated igniter system, so you don’t need matches or lighters to light the burners.

Not only is the Blackstone Griddle efficient and easy to use, but it’s also incredibly safe. It has several safety features that can help prevent accidents, such as an auto shut-off if the temperature gets too high or if there’s a leak.

Plus, if you ever experience any issues with the igniter not working, there are common causes that can be quickly identified and treated.

Common Causes of Igniter Not Working on Blackstone Griddles

Cooking on a Blackstone Griddle is an outdoor experience like no other.

Perfect for everything from burgers to pancakes, this griddle is powered by propane gas for consistent and even heat and comes with four adjustable burners beneath its flat surface. Plus, you won’t need matches or lighters.

Why Does Your Blackstone Igniter Not Work-2

But sometimes, the igniter just won’t work. If that’s the case, there are a few common causes to investigate before calling in a specialist.

  • First off, check your spark module. Press the igniter button and if it’s defective, it won’t produce a spark and your igniter won’t ignite.
  • Next, take a look at your starter button – if it’s worn or broken it won’t be able to send an electrical signal to the spark module. Low battery power can also prevent an electrical signal from reaching the spark module so make sure you have enough juice.
  • Finally, inspect your griddle for any debris or grease buildup as this can stop the spark from reaching its intended target and consequently prevent your igniter from working properly.

Step-By-Step Guide to Troubleshooting Your Igniter

Diagnosing and fixing your griddle’s igniter doesn’t have to be a difficult task – just follow this step-by-step guide for a quick and easy solution.

  • Start by making sure the igniter is powered by a new and working 9-volt battery. If not, replace it with a fresh one.
  • Next, remove the spark electrode and clean it with a wire brush and some rubbing alcohol. This will get rid of any debris or residue that may be preventing proper ignition.
  • Check the spark gap next – this determines how far apart the electrodes should be for proper ignition. It should be between 0.020 and 0.025 inches; if it is too wide, use needle nose pliers to adjust accordingly.
  • Finally, if all else fails, you may need to replace your igniter with a new one – but make sure you take all necessary safety precautions when handling propane.

Check the Spark Module

If your Blackstone griddle isn’t lighting up, the spark module could be the cause. This small yet powerful component is responsible for igniting the grill.

If it’s not working correctly, you won’t be able to get your griddle cooking. Here’s how to check if it needs to be replaced.

  • Start by locating the spark module on your Blackstone grill and removing it from its housing.
  • Inspect the wiring and connections to make sure they are secure and in good condition.
  • Then, connect it to a 9V battery and press the switch on the side of the module – if there is no spark or a weak one, you’ll need to replace it with a new one.
  • Replacing the spark module is straightforward but requires safety precautions when handling propane – so make sure you take all necessary steps.
  • Once you’ve done this, reassemble your Blackstone grill and try lighting it using your igniter.

Clean the Spark Electrodes

When it comes to firing up your Blackstone griddle, the spark electrodes are essential components. Unfortunately, these tiny but mighty electrodes can easily get clogged with grease, dirt, or other debris and prevent them from sparking correctly. But don’t worry – cleaning them is a breeze.

First, make sure the grill is off and unplugged.

Then, unscrew the electrode cover from the side of the grill and use a small brush to remove any debris from around the spark electrodes.

Once you’re done, replace the electrode cover and plug your Blackstone Igniter back in. With just a few simple steps, you’ll be back to grilling in no time.

Maintaining your Blackstone griddle may take more effort than expected – but it’s worth it for those delicious meals.

Inspect the Igniter Switch and Connections

It’s essential to inspect the igniter switch and connections on your Blackstone griddle regularly to ensure it is in working order. This switch is found on the back of the griddle and is what connects the spark electrodes to the wiring harness, allowing electricity to flow through and ignite your grill.

To check for a loose connection, unplug the wiring harness from the switch and examine both ends for signs of wear or damage. If you notice any frayed wires or rust, it’s time to replace the wiring harness with a new one.

Additionally, use a multimeter to test for continuity between both ends of the wiring harness. If no continuity is detected, replace it with a new one.

How to Replace a Spark Module or Igniter Switch

Identifying the Issue

Replacing a spark module or igniter switch can be a daunting task, but it’s important to make sure you’re replacing the right part for your Blackstone griddle.

To do this, first identify the cause of the malfunction – is it a defective spark module, dirty spark electrodes, or a defective igniter switch? Once you know what’s wrong, you’ll be ready to replace the part.

Shopping for Replacement Parts

When shopping for replacement parts for your Blackstone griddle, make sure you know what type of spark module or igniter switch you need. Before buying anything, double check the model number and model type of part.

Additionally, it’s also important to buy parts that are compatible with your griddle – otherwise, they won’t function.

Unplugging and Disassembling Your Griddle is Ready to Install

Before installing your new spark module or igniter switch, unplug the power cord from the wall outlet and remove any burner knobs from the front of the grill.

Locate the spark module or igniter switch near the back of the griddle and use a screwdriver to remove any screws that are holding it in place.

Carefully disconnect all wires that are connected to it and remove it from its mounting bracket.

Installing Your New Part

Now that your old spark module or igniter switch has been removed, connect all wires back to your new one before screwing it into its mounting bracket. Make sure all connections are secure and tight before testing out your component.

Ensuring Everything Works Properly

Plug in your power cord and turn on all of your burners one at a time. If everything works as expected – congratulations. You have successfully replaced your spark module or igniter switch.


Scroll to Top